Get Instant Access of 100% Real HP HPE0-S59 Exam Questions with Verified Answers
Exam Dumps for the Preparation of Latest HPE0-S59 Exam Questions
NEW QUESTION # 12
Which statement about HPE Superdome Flex 280 is true?
- A. It can support up to two nPars with an external RMC.
- B. It must be equipped with at least 768 GB of memory.
- C. it cannot be managed using HPE OneView.
- D. It supports 2 to 8 sockets in 2-socket increments.
Answer: B
NEW QUESTION # 13
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE Synergy 480 Gen10 Plus
- B. HPE ProLiant DL580 Gen10
- C. HPE Superdome Flex system
- D. HPE ProLiant OL380 Gen 10 Plus
Answer: A
NEW QUESTION # 14
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?
- A. HPE Superdome Flex Grid licenses enabling connectivity between chassis
- B. One base chassis and three expansion chassis with licenses
- C. Rack Management Controller for nPar management
- D. At least Tour HPE Persistent Memory DIMMs per nPar
Answer: B
NEW QUESTION # 15
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Storm control
- B. Port flap protection
- C. Pause flood protection
- D. sFlow
Answer: D
NEW QUESTION # 16
Which statement about manual orchestration during the firmware update is true?
- A. It is supported only for logical enclosures with at least three frames
- B. It allows all the interconnect modules to be activated manually at the same time.
- C. It provides an ability to select and update one side of the Interconnect topology at a time
- D. It provides the ability to install an older firmware version than currently Installed In the interconnect
Answer: C
NEW QUESTION # 17
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?
- A. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- B. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
- C. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
- D. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
Answer: D
NEW QUESTION # 18
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. Storm control
- B. Pause flood protection
- C. LLDP tagging
- D. Loop protection
Answer: A
NEW QUESTION # 19
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- B. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- C. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
Answer: C
NEW QUESTION # 20
What is one of me benefits of using HPE Composer 2?
- A. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
- B. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
- C. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
- D. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
Answer: D
NEW QUESTION # 21
What is a limitation when creating a server profile?
- A. BIOS settings can be changed only when UEFI optimized is selected as boot mode
- B. Administrator cannot define more than 8 connections within a server profile
- C. ILO management is limited to the integration with Active Directory or LDAP
- D. It is not possible to create shared volumes on demand through a server profile
Answer: C
NEW QUESTION # 22
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?
- A. Dedicated VMKernel port
- B. Load balancing cluster
- C. vSphere Standard license
- D. Virtual Distributed Switch
Answer: A
NEW QUESTION # 23
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. The customer can add one D3940 storage Module to each of the frames
- B. To manage all frames, the customer must buy two additional HPE Composer 2 modules
- C. To use all compute nodes, the customer must create at least two logical enclosures
- D. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
Answer: D
NEW QUESTION # 24
What is a restriction of using a RoCE network?
- A. It does not support smart link and private network features.
- B. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- C. It is by default configured as an untagged network and cannot be a part of a network set.
- D. It does not support Private VLAN and Multicast VLAN.
Answer: C
NEW QUESTION # 25
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Answer:
Explanation:
NEW QUESTION # 26
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For an uplink set, ports from different modules can be selected
- B. An additional license is required to change the enclosure count
- C. interconnect modules are installed in interconnect bays 1 and 4
- D. Both modules are located in different frames for redundancy
Answer: B
NEW QUESTION # 27
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At HPE OneView Interface to verify whether the server is In the maintenance mode
- B. At the iLO interface to verify whether the ILO Advanced license is properly applied
- C. At HPE OneView Interface to verify whether the iLO processor is disabled
- D. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
Answer: B
NEW QUESTION # 28
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If there Is a logical interconnect created based on the 12Gb SAS switches.
- B. If the D3940 module is imported in managed state that allows volume provisioning.
- C. If there is at least one ISCSI network configured that will provide access to the module.
- D. If the D3940 storage module is property licensed through HPE OneView interface.
Answer: B
NEW QUESTION # 29
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- B. Enable FC primary and secondary boot on the modules through the HPE OneView interface
- C. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
- D. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
Answer: C
NEW QUESTION # 30
......
Download Latest & Valid Questions For HP HPE0-S59 exam: https://certkingdom.pass4surequiz.com/HPE0-S59-exam-quiz.html