Full D-PE-OE-23 Practice Test and 325 unique questions with explanations waiting just for you!
DECA-PowerEdge Dumps D-PE-OE-23 Exam for Full Questions - Exam Study Guide
NEW QUESTION # 130
A technician is troubleshooting a rackmount server that is NOT displaying video.
The technician has the following information:
- Known good monitor does NOT work when plugged into the front VGA port
- The power button is on
- iDRAC has an enterprise license
- The "i" button is blue
- NO operating system is installed on the server
Which two steps should the technician take to troubleshoot the issue? (Choose two.)
- A. Use iDRAC Virtual Console to check video
- B. Press the "i" button down for 20 seconds to reset the iDRAC
- C. Plug the known good monitor to the rear VGA port
- D. Perform a cold boot of the system via the iDRAC
- E. Run system diagnostics from the Lifecycle Controller
Answer: A,C
NEW QUESTION # 131
A system administrator is trying to connect with a mobile device to a Dell PowerEdge 16G server using Quick Sync 2. They failed to make a connection.
What is the reason for the failure?
- A. Bluetooth is disabled on the mobile device.
- B. NFC is disabled on the mobile device.
- C. The mobile device is using iOS.
- D. There is no iDRAC IP address configured.
Answer: A
NEW QUESTION # 132
A system administrator plans to use a remote desktop that has the DRAC tools installed to run RACADM commands.
Which two CLI options must be in the RACADM command? (Select 2)
- A. Login credentials
- B. Host OS credentials
- C. IP address of iDRAC
- D. Certificate
Answer: A,C
NEW QUESTION # 133
You have been tasked with configuring a Dell EMC PowerEdge server to be a file server. The server operating system has been installed and there are 8 x 1TB drives that must be configured.
Which RAID configuration would provide the maximum usable space with maximum redundancy?
- A. RAID 5
- B. RAID 10
- C. RAID 50
- D. RAID 0
Answer: C
NEW QUESTION # 134
Which is a feature of SNAP I/O?
- A. Higher latency
- B. Bypasses UPI and directly connects to both CPU sockets
- C. Does not use a PCIe slot
- D. Lower network throughput
Answer: B
NEW QUESTION # 135
What is a valid password option available from the iDRAC9 Unique ID feature?
- A. Encryption Default
- B. Randomly Generated
- C. Secure Default
- D. Legacy Generated
Answer: B
NEW QUESTION # 136
A technician is updating firmware on a Windows Server using the Lifecycle Controller following a NIC replacement, but it fails to complete the update on the NIC despite successfully updating other components.
The update's read me confirms that the current version is too old to upgrade with the Lifecycle Controller and an alternative method must be used.
Which three update methods could the technician use to meet this requirement? (Choose three.)
- A. Run a Dell Update Package (DUP) from the OS
- B. Use Update and Rollback within the iDRAC web GUI
- C. Create a bootable ISO file with Repository Manager
- D. Launch Platform Update from OpenManage Server Administrator
- E. Launch Server Update Utility (SUU) from the OS
Answer: A,C,D
NEW QUESTION # 137
Which tool allows an administrator to remotely back up a PowerEdge server configuration to streamline server deployments?
- A. OME
- B. iDRAC
- C. OMSA
- D. Virtual console
Answer: B
NEW QUESTION # 138
A technician needs to use the Lifecycle Controller to update the server usingftp.dell.com.
Which step must the technician take to complete this task?
- A. Providethe FTP credentials
- B. Download the repository to a local USB
- C. Enable FTP protocol in the Lifecycle Controller
- D. Configure the Lifecycle Controller with an IP address
Answer: D
NEW QUESTION # 139
Refer to the exhibit.
A technician is testing basic SMTP alerts on an iDRAC for a server. The test SMTP alerts fail with the message shown. The technician can ping the hostname of the SMTP server from their workstation.
Which two actions should the technician take to fix the issue? (Choose two.)
- A. Enable the SMTP Client service on the iDRAC
- B. Use the IP address of the SMTP server
- C. Verify SMTP port settings on the iDRAC
- D. Add iDRAC hostname to the SMTP server hosts file
Answer: B,C
NEW QUESTION # 140
Which sections are included in the iDRAC Troubleshooting tab?
- A. Last crash screen, Video capture, and, Diagnostics
- B. Diagnostics, Last crash screen, and Post Code
- C. Post Code, Diagnostics, and Video capture
- D. Video capture, Post Code, and Last crash screen
Answer: D
NEW QUESTION # 141
A new server has 128 GB of RAM and three 1 TB drives. After creating a RAID 5 array with the three internal drives on the system, a technician boots to the Lifecycle Controller to install Windows Server
2016. When the technician tries to select an install location, Windows displays an error message that states that it cannot be installed to that location.
What should the technician do to resolve this issue?
- A. Change the boot mode from BIOS to UEFI
- B. Delete the array and use the Lifecycle Controller to configure the array
- C. Verify that the license for installing an OS to a virtual disk is installed
- D. Bring up the command prompt by pressing shift F10 and use the disk part to clean the disk
Answer: A
NEW QUESTION # 142
A technician receives a repurposed Dell EMC PowerEdge server. The server already has the OS and the Dell Tools software installed. After racking and cabling the server, the technician attempts to log into the iDRAC but cannot do so.
The default login account has been disabled.
What method can be used to enable the default login account?
- A. Run the racadm racresetcfg command from the host OS
- B. SSH into the iDRAC and run the racadm racreset command
- C. Run the racadm racreset command from the host OS
- D. SSH into the iDRAC and run the racadm racresetcfg command
Answer: A
NEW QUESTION # 143
Where is the data stored to allow Easy Restore to successfully complete a system board replacement?
- A. NAND Flash module on the disk drive mid plane
- B. Serial Flash storage in the server's front panel
- C. IDSDM SD card
- D. vFlash SD card
Answer: D
NEW QUESTION # 144
An engineer must install a new GPU card in a Dell PowerEdge 15G server. They discover the server has two 570W PSU, but the new configuration requires 900W of power. More powerful PSUs are ordered.
What can be done for the system to support the GPU card before replacing the PSUs?
- A. Change the redundancy configuration to 2+0.
- B. Enable Power Capping and set a limit of 150%.
- C. Disable Power Capping and remove any limit.
Answer: A
NEW QUESTION # 145
A user has a service with only one processor installed with 6x 32 GB ROIMMs. A technician was asked to install a second processor. After installing the second processor, the technician finds that the second processor is not operational.
What should be done to make the second processor operation?
- A. The ROIMMs need to be moved so that there are three RDIMMs on each CPU
- B. Logical processor must be enabled in the BIOS
- C. The iDRAC license needs to be at either Express or Enterprise levels
- D. The second CPU socket needs to be enabled
Answer: A
NEW QUESTION # 146
Refer to the exhibit.
A technician it installing an OS to a server. The OS array is 2.8TBs. The OS install is unable to start.
What should the technician do to install the OS?
- A. Use LC to install the OS
- B. Use USB to load Storage Drivers
- C. Switch the boot settings to UEFI
- D. Switch the Hard Drive boot sequence so that C: is first
Answer: D
NEW QUESTION # 147
......
Authentic Best resources for D-PE-OE-23 Online Practice Exam: https://certkingdom.pass4surequiz.com/D-PE-OE-23-exam-quiz.html