[Q25-Q43] MD-100 PDF Download Nov-2022 Microsoft Test To Gain Brilliante Result!

MD-100 PDF Download Nov-2022 Microsoft Test To Gain Brilliante Result!

Provide Updated Microsoft MD-100 Dumps as Practice Test and PDF

NEW QUESTION 25
You have a computer named Computer1 that runs Windows 10 and has the users shown in the following table.

Computer1 contains the folders shown in the following table.

You move Folder1 into Folder2.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 26
You need to Windows 10 to 20 new laptops.
The laptops will be recommend a solution to lock the laptop when the users leave their laptop for an extended period.
Which two actions should you include in the recommendation? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. From the settings app, configure the Dynamic lock settings.
B. From Sign-in option, configure the Windows hello settings.
C. Enable Bluetooth discovery.
D. From the Settings app, configure the lock screen settings.
E. From the Settings app, configure the Screen timeout settings
F. Pair the Android device the laptop.

Answer: C,F

NEW QUESTION 27
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that runs Windows 10.
A service named Application1 is configured as shown in the exhibit.

You discover that a user used the Service1 account to sign in to Computer1 and deleted some files.
You need to ensure that the identity used by Application1 cannot be used by a user to sign in to sign in to the desktop on Computer1. The solution must use the principle of least privilege.
Solution: On Computer1, you assign Service1 the deny log on locally user right.
Does this meet the goal?

A. No
B. Yes

Answer: A

Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/windows/security/threat-protection/security-policy-settings/deny-log-on-locally

NEW QUESTION 28
You have a computer named Computer1 that runs Windows 10.
On Computer1 you create a VPN connection as shown in the following exhibit.

Answer:

Explanation:

NEW QUESTION 29
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password

Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 11145882

You have already prepared Client1 for remote management.
You need to forward all events from the Application event log on Client1 to DC1.
To complete this task, sign in to the required computer or computers.

Answer:

Explanation:
See explanation below.
Explanation
Configuring the event source computer
1. Run the following command from an elevated privilege command prompt on the Windows Server domain controller to configure Windows Remote Management:
winrm qc -q
2. Start group policy by running the following command:
%SYSTEMROOT%\System32\gpedit.msc
3. Under the Computer Configuration node, expand the Administrative Templates node, then expand the Windows Components node, then select the
4. Right-click the SubscriptionManager . Enable the SubscriptionManager setting, and click the Show button to add a server address to the setting. Add at least one setting that specifies the event collector computer. The window contains an Explain tab that describes the syntax for the setting.
5. After the SubscriptionManager setting has been added, run the following command to ensure the policy is applied:
gpupdate /force
Configuring the event collector computer
1. Run the following command from an elevated privilege command prompt on the Windows Server domain controller to configure Windows Remote Management:
winrm qc -q
2. Run the following command to configure the Event Collector service:
wecutil qc /q
3. Create a source initiated subscription. This can either be done programmatically, by using the Event Viewer, or by using Wecutil.exe. If you use Wecutil.exe, you must create an event subscription XML file and use the following command:
wecutil cs configurationFile.xml
Reference:
https://docs.microsoft.com/en-us/windows/win32/wec/setting-up-a-source-initiated-subscription#forwarding-the-

NEW QUESTION 30
You have 15 computers that run Windows 10. Each computer has two network interfaces named Interface1 and Interface2.
You need to ensure that network traffic uses Interface1, unless Interface1 is unavailable.
What should you do?

A. Set a static IP address on Interface 1.
B. Run the Set-NetAdapterBinding -Name Interface2 -Enabled $true -ComponentID ms_tcpip - ThrottleLimit 0 command.
C. From Network Connections in Control Pane, modify the Provider Order.
D. Run the Set-NetIPInterface -InterfaceAlias Interface1 -InterfaceMetric 1 command.

Answer: D

Explanation:
Reference:
https://tradingtechnologies.atlassian.net/wiki/spaces/KB/pages/27439127/How+to+Change+Network+Adapter+Priorities+in+Windows+10
https://docs.microsoft.com/en-us/powershell/module/nettcpip/set-netipinterface?view=win10-ps

NEW QUESTION 31
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains the users shown in the following table.

You have a computer named Computer1 that runs Windows 10 and is in a workgroup.
A local standard user on Computer1 named User1 joins the computer to the domain and uses the credentials of User2 when prompted.
You need to ensure that you can rename Computer1 as Computer33.
Solution: You use the credentials of User2 on Computer1.
Does this meet the goal?

A. No
B. Yes

Answer: A

Explanation:
Renaming a domain-joined computer will also rename the computer account in the domain. To do this, you need domain administrator privileges.
User2 is a domain user, not an administrator. Use User3's credentials instead.
References:
https://docs.microsoft.com/en-us/windows/security/identity-protection/access-control/active-directory-security- groups

NEW QUESTION 32
You have a computer named Computer1 that runs Windows 10 and contains the following files:
* C:\Folder1\File1.bat
* C:\Folder1\File1.exe
* C:\Folder1\File1.cmd
A user named User1 is assigned Read & execute to all the files.
Computer1 is configured as shown in the exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

References:
https://stackoverflow.com/questions/148968/windows-batch-files-bat-vs-cmd

NEW QUESTION 33
You have a computer named Computer1 that runs Windows 10.
You are troubleshooting Group Policy objects (GPOs) on Computer1.
You run gpresult /user user1 /v and receive the output shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://www.windowscentral.com/how-apply-local-group-policy-settings-specific-users-windows-10

NEW QUESTION 34
You need to take remote control of an employee's computer to troubleshoot an issue.
What should you send to the employee to initiate a remote session?

A. an Easy Connect request
B. a numeric security code
C. a password
D. a connection file

Answer: B

Explanation:
Reference:
https://support.microsoft.com/en-us/help/4027243/windows-10-solve-pc-problems-with-quick-assist

NEW QUESTION 35
You need to meet the technical requirements for the helpdesk users.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://www.itprotoday.com/compute-engines/what-group-policy-creator-owners-group

NEW QUESTION 36
Your network contains an Active Director domain. The domain contains a group named Group1.
All the computers in the domain run Windows 10. Each computer contains a folder named C:\Document that has the default NTFS permission set.
You add a folder named C:\Document\Templates to each computer.
You need to configure the NTFS permission to meet the following requirements:
All domain users must be able to open the files in the templates folder.
Only the member of Group must be allowed to edit the files in the Templates folder.
How should you configure the NTFS settings on the Templates folder? To answer select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation
Enable inheritance
Allow Modify

NEW QUESTION 37
You have a computer named Computer1. Computer1 runs Windows 10 Pro. You want to use Computer1to test new Windows features.
You need to configure Computer1to receive preview builds of Windows 10 as soon as they are available.
You open the Update & Security section in the Settings app.
What should you configure? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

Reference:
https://insider.windows.com/en-us/getting-started/

NEW QUESTION 38
You have a computer named Computer1 that runs Windows 10.
On Computer1, you create a VPN connection as shown in the following exhibit.

The corporate network contains a single IP subnet.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 39
You have a computer that runs Windows 10 and is joined to Azure Active Directory (Azure AD).
You attempt to open Control Panel and receive the error message shown on the following exhibit.

You need to be able to access Control Panel.
What should you modify?

A. a Group policy preference
B. the Settings app
C. the PowerShell execution policy
D. the Local Group Policy

Answer: D

Explanation:
Explanation/Reference:
References:
https://windows10skill.com/this-operation-has-been-cancelled-due-to-restrictions-in-effect-on-this-pc/

NEW QUESTION 40
SIMULATION
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password

Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 10921597

You need to ensure that a local user named User1 can establish a Remote Desktop connection to Client2.
To complete this task, sign in to the required computer or computers.

A. Add User to Remote Desktop Users Group via Settings App
* Open the Settings app on Client2 and go to System -> Remote Desktop. Click on the Select users that can remotely access this PC link on the right side.
* When the Remote Desktop Users dialog opens, click on Add.
* Click on Advanced.
* Click on Find Now and then select any user account you want to add to the "Remote Desktop Users" group, and click OK.
* Click OK and you're done.
B. Add User to Remote Desktop Users Group via Settings App
* Open the Settings app on Client2 and go to System -> Remote Desktop.
* Click on Advanced.
* Click on Find Now and then select any user account you want to add to the "Remote Desktop Users" group, and click OK.
* Click OK and you're done.

Answer: A

Explanation:
Reference:
https://www.top-password.com/blog/add-user-to-remote-desktop-users-group-in-windows-10/

NEW QUESTION 41
You need to meet the technical requirements for EFS on ComputerA.
What should you do?

A. Run certutil.exe, and then add a certificate to the local computer certificate store.
B. Run certutil.exe, and then add a certificate to the local Group Policy.
C. Run cipher.exe, and then add a certificate to the local Group Policy.
D. Run cipher.exe, and then add a certificate to the local computer certificate store.

Answer: D

Explanation:
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/windows/security/information-protection/windows-information-protection/ create-and-verify-an-efs-dra-certificate Manage Devices and Data Question Set 3

NEW QUESTION 42
You have a computer named Computer1 that runs Windows 10.
On Computer1, you create the local users shown in the following table.

Which three user profiles will persist after each user signs out? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.